Stainless Steel Commercial Juice Extractor


  • Power: 180W, Net weight: 7.5Kg/26.45Lbs,Rotate speed: 2800 RPM, production speed: up to 5 1/4 quarts per minute
  • Commercial juice extractor is stainless steel construction for easy cleaning and corrosion prevention
  • Commercial juicer has adjustable juice outlet (8 different positions) for convenient placement
  • Juice extractor has the function of separating fruit and vegetable juice and the slag
  • Centrifugal juicer is ideal for juice bars, health clubs, spas, restaurants and institutions and any other place where fresh juice is in demand


Stainless Steel Commercial Juice Extractor , Juice Making Machine


* 700/850 watt AC motor for quick, efficient operation.
* Removable large capacity 1.5 liter pulp container & 0.8 liter juice jug.
* Rotary switch w/ Two speeds setting: High & Low for hard & softer
fruits and vegetables.
* 75 mm extra wide feeder for a whole apple and other fruits or vegetables.
* Stainless steel micro-mash filter
* Blue LED light as power indicator in the swtich panel
* Stainless steel housing ,AS up cover and juicer cup, PP pulp container
* Extracting various kinds of fruits and vegetables, such as carrot,apple,pear…watermelon also available
* Product size: L39.0xW29.0xH43.3cm


Juicer extractor KX-A1000

Voltage: 220V
Frequency: 50Hz
Power: 180W
Rotate Speed :4300r/min
G.W: 7.5kg
N.W.: 7kg
Extracting Quantity:50 -65kg/hr
Fuselage Size 358×220× 300mm
Package 420×290× 350mm

1.Operation Procedure:
A. Power supply of 110v-240v The power supply must have the safety system to connect with the ground.

Please don’t replace the machine’s cable by yourself.
B. Check the lid whether lock closely with the bower centering (You can pull the spigot of juice for cask

that made of stainless steel if it not move, it’s correct .If it is lax you can readjust the lock pin
C.Connect to the power supply and turn on the machine, examine the machine with your eyes and ears to

make sure the function normal before normal work.
2. The process of operation.
Please clean the fruit or vegetable you want to squeeze before squeeze and peel off the husk.(For

example :orange, watermelon).Some fruit like peach and apricot they have the firm pip you must take out

them or it will shatter machine .Cutting the pulp into piece or block smaller than the size of the ostium for

putting the pulp. Then put them into clean container. When turn on the machine you can put the pulp into

ostium continuously or use the fruit pusher, then the fresh juice will pour from the ostium If you want to

change fruit or vegetable the machine worked in normally, infusing clean water into ostium it will be

cleaned and the peculiar smell will be resisted.

3.After Operation:
If you want to clean or change the blade and centrifugation basket after you use the machine over.You

must turn off the power then you can open the lid and screw the nut, take out the blade, centrifugation
basket to clean completely (Don’t move the other parts lest should effect the quality for boot-strap).
Finally install the parts with reversed sequence. Putting on the lid then the machine can work normally


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.